DrayOS Hotspot Web Portal supports various authentication methods like facebook, Google. After Hotspot Web Portal clients provide their account credentials, these external servers will send API (permit) back to the router to allow Internet access.
ACS 3 can achieve it too. By setting up ACS 3 as an external portal server, we are able to:
- Set up hotspot profiles and apply them to mutiples CPEs in a specific Network group at one time.
- Manage tons of data which comes from mutiple CPEs and analyze the usage on ACS server.
- Store MAC addresses of clients’ devices so they don’t need to be authenticated again in the valid
connection time.
This article will demonstrate how to set up ACS 3 as a Hotspot Portal Server.
How does ACS 3 work as an external Hotspot Portal Server?
- On ACS 3 Dashboard
- Tap the Network box which is located at the top.
-
Click the network group.
-
Go to Hotspot Web Portal >> Profile.
-
Click Add and name the new profile
-
Click Edit at the new profile
- On the profile setup page,
-
After customizing the Splash page, please add Radius server IP and ACS IP to destination IP on Whitelist Setup page, so that CPE allows Radius server and ACS to pass.
-
Apply the profile: Go to Hotspot Web Portal >> Network & Device.
- At Network & Device page,
- Select the User Group
- Select the Hotspot Web Portal profile for the device(s).
-
Click Save
-
Go to Hotspot Web Portal >> Profile, click View Log
-
Status Overview is available to observe the applied process.
-
On CPE site, the hotspot profile will be set up after ACS finished provisioning.
-
Once new clients connect to the selected interface of the router, they need to use one of the authentications to access the Internet.
Note: ACS 3 does apply the profile only when CPEs send inform to it. Thus if there is no ACS applied profile on the CPEs site, please go to System Maintenance >> TR-069 Setting and click Test With Inform or wait for the next periodic inform.
-
Go to Hotspot >> Web Portal Analytics, this page will demonstrate all clients’ information.
-
For detailed information, click View Detail at Action.