|
|
Products Center
Dual WAN Security Router
Vigor2910i |
|
|
1. Dual-WAN
- Outbound Policy-Based Load-Balance
- BoD (Bandwidth on Demand)
- WAN Connection Fail-over
|
2. ISDN
- Euro ISDN Compatible
- Automatic ISDN Backup
- Support 64/128Kbps ( Multilink-PPP)/
BoD ( Bandwidth on Demand )
- Remote Dial-in/LAN-to-LAN connection
- Remote Activation
- Virtual TA
|
3. WAN Protocol
- DHCP Client
- Static IP
- PPPoE
- PPTP
- BPA
- L2TP
|
4. Firewall
- CSM (Content Security Management)
for IM/P2P Application
- Multi-NAT, DMZ Host, Port-Redirection/Open
Port
- Policy-Based IP Packet Filter
- DoS/DDoS Protection
- IP Address Anti-Spoofing
- E-Mail Alert and logging via Syslog
- Bind IP to MAC Address
|
5. VPN
- Up to 32 VPN Tunnels
- Protocol: PPTP, IPSec, L2TP, L2TP
over IPSec
- Encryption: AES, MPPE and Hardware-Based
DES/3DES
- Authentication: MD5, SHA-1
- IKE Authentication: Pre-shared Key
and Digital Signature (X.509)
- LAN-to-LAN, Teleworker-to-LAN
- DHCP over IPSec
- NAT-Traversal (NAT-T)
- Dead Peer Detection (DPD)
- VPN Pass-Through
- VPN Backup
|
6. USB
7. Bandwidth Management
- Class-based Bandwidth Guarantee
by User-Defined Traffic Categories
- DiffServ Code Point Classifying
- 4-level Priority for Each Direction
(Inbound/Outbound)
- Bandwidth Borrowed
- Bandwidth/Session Limitation
|
8. Network Management
- Support TR-069
- Web-Based User Interface (HTTP/HTTPS)
- Quick Start Wizard
- CLI (Command Line Interface) / Telnet/SSH*
- Administration Access Control
- Configuration Backup/Restore
- Built-in Diagnostic Function
- Firmware Upgrade via TFTP/FTP
- Logging via Syslog
- SNMP Management with MIB-II
|
9. Content Filter
- URL Keyword Blocking (White list
and Black list)
- Java Applet, Cookies, Active X,
Compressed / Executable / Multimedia
File Blocking
- Web Content Filter (SurfControl)
- Time Schedule Control
|
10. Network Features
- DHCP Client/Relay/Server
- Dynamic DNS
- NTP Client
- Call Scheduling
- RADIUS Client
- DNS Cache/Proxy
- UPnP
- Port-Based VLAN
- Configurable WAN2
- Routing Protocol:
|
|
|
|
Technical
Specifications of Vigor2910i |
| Hardware
Interface |
LAN |
Maximum 4-port 10/100
Base-TX Switch |
| WAN |
Maximum 2-port 10/100
Base-TX Ethernet |
| ISDN |
1-port ISDN with RJ-45
connector |
| USB |
1-port USB for connecting
to USB printer or 3G
USB Modem |
| Dual-WAN |
Outbound Policy-Based
Load-Balance |
| BoD (Bandwidth on
Demand) |
| WAN Connection Fail-over |
| ISDN |
Euro ISDN Compatible |
| Automatic ISDN Backup |
| Support 64/128Kbps ( Multilink-PPP)/
BoD ( Bandwidth on Demand ) |
| Remote Dial-in/LAN-to-LAN
connection |
| Remote Activation |
| Virtual TA |
| WAN Protocol |
DHCP Client |
| Static IP |
| PPPoE |
| PPTP |
| BPA |
| L2TP |
| Firewall |
CSM (Content Security
Management) for IM/P2P Application |
| Multi-NAT, DMZ Host, Port-Redirection/Open
Port |
| Policy-Based IP Packet
Filter |
| DoS/DDoS Protection |
| IP Address Anti-Spoofing |
| E-Mail Alert and Logging
via Syslog |
| Bind IP to MAC Address |
| VPN |
Up to 32 VPN Tunnels |
| Protocol |
PPTP , IPSec , L2TP
, L2TP over IPSec |
| Encryption |
MPPE |
| AES |
| Hardware-Based DES/3DES |
| DHCP over IPSec |
| IKE Authentication: Pre-shared
Key and Digital Signature (X.509) |
| NAT-Traversal (NAT-T) |
| Dead Peer Detection (DPD) |
| VPN Pass-Through |
| LAN to LAN |
| Teleworker to LAN |
| VPN Backup |
| Bandwidth
Management |
Class-Based Bandwidth
Guarantee by User-Defined Traffic Categories |
| DiffServ Code Point Classifying |
| 4-level Priority for Each
Direction (Inbound/Outbound) |
| Bandwidth Borrowed |
| Bandwidth/Session Limitation |
| Network Management
|
Support TR-069 |
| Web-Based User Interface
(HTTP/HTTPS) |
| Quick Start Wizard |
| CLI (Command Line Interface)
/ Telnet/SSH* |
| Administration Access Control |
| Configuration Backup/Restore |
| Built-in Diagnostic Function |
| Firmware Upgrade via TFTP/FTP |
| Logging via Syslog |
| SNMP Management with MIB-II |
| Content Filter
|
URL Keyword Blocking (White
list and Black list) |
| Java Applet, Cookies,
Active X, Compressed / Executable / Multimedia
File Blocking |
| Web Content Filter (SurfControl) |
| Time Schedule Control |
| Network Features
|
DHCP Client/Relay/Server |
| Dynamic DNS |
| NTP Client |
| Call Scheduling |
| RADIUS Client |
| DNS Cache/Proxy |
| UPnP |
| Port-Based VLAN |
| Configurable WAN2 |
| Routing Protocol |
Static Routing |
| RIP V2 |
Temperature |
Operating : 0°C ~ 45°C |
| Storage : -25°C ~ 70°C |
| Humidity |
10% ~ 90% ( non-condensing
) |
| Max. Power |
10 Watt |
| Dimension |
L220 * W160 * H36 ( mm
) |
| Power |
DC 12V ~ 15V |
|
|
The Vigor2910 series provides a configurable second
WAN interface and supports policy-based load-balancing
and connection fail-over on dual-WAN interface. Except
the QoS function for the original IP layer, it also
supports NAT session/bandwidth management which increases
the usage efficiency of bandwidth greatly.
| Dual
WAN Application |
| It allows users to access Internet
and combine the bandwidth of the dual WAN
to speed up the transmission through the network.
Each WAN port can connect to different ISPs,
Even if the ISPs use different technology
to provide telecommunication service (such
as DSL, Cable modem, etc.). If any connection
problem occurred on one of the ISP connections,
all the traffic will be guided and switched
to the normal communication port for proper
operation. |
Figure 2 . Dual WAN
|
| VPN
Backup Application |
What is VPN Backup?
If there is only one VPN tunnel between the
main office and a remote branch office, when
this VPN connection is dropped and can't be
restored within minutes because of a network
problem, you have to wait hours or days until
the network administrator manually create
another VPN connection. This will impact business
operations and revenue.
With the DrayTek VPN Backup feature you can
maintain a permanent connection between two
sites. Once a VPN connection is dropped, an
automatic backup VPN connection will be implemented.
Example :
A VPN TRUNK
profile with member 1 (IPSec type) and Member
2(L2TP over IPSec) has been created for Router
A for connecting with Router B. In general,
Router A connects to Router B through Member
1 VPN tunnel (with IPSec type).
However, if the connection is off-line, Router A will use Member 2 VPN tunnel (with L2TP over IPSec) instead to connect Router B right away.
Figure 3 . VPN
Backup Application |
Subsidiary in Asia can use vigor router as VPN client. Every day it should transmit ERP, Mail or order information to headquarter in Europe. The Vigor router can build another backup VPN tunnel to subsidiary in America through LAN-to-LAN, and the VPN server in the subsidiary in American can build Routing /RIP. When the VPN tunnel is off-line, the subsidiary in Asia can send the data (that should be transmit to headerquarter in Europe) to the subsidiary in America, then the subsidiary in America transmit the data to headerquarter in Europe through VPN server by using VPN tunnel backup connection.
Figure 4 . VPN
Backup Application |
More
Application
|
DrayTek supports 3G HSDPA USB Modem via USB port
of Vigor2910 series from firmware version V3.0.6
and above. It is a good application for the mobile
sharing environment.
For 3G mobile communication through Access Point
is popular more and more, Vigor 2910 adds the
function of 3G network connection for such purpose.
By connecting 3G USB Modem to the USB port of
Vigor2910, it can support HSDPA/UMTS/EDGE/GPRS/GSM
and the future 3G standard (HSDPA, etc). Vigor2910
with 3G USB Modem allows you to receive 3G signals
at any place such as your car or certain location
holding outdoor activity and share the bandwidth
for using by more people. Users can use four LAN
ports on the router to access Internet.
Figure 5 . 3G Application
Figure |
Figure 6 . 3G Application
Figure |
| Smart
VPN Client Application |
Figure 7. Smart VPN Client |
|
|
|
|
Page last modified : 09 September 2008 |