|
|
Products Center
IP DSLAM
VigorAccess |
|
|
| To meet the increasing
demand for high-speed internet access and
triple play application service. The next
generation network offers a feasible functionality
of integrated services with the most cost
effective architecture. IP DSLAM network is
designed to provide rich video contents, DSL
, POTS and VoIP service over traditional copper
wire infrastructure. These types of service
will be supported on NGN architecture simultaneously.
DSL is used as the data service platform,
video and VoIP or traditional POTS technology
is basis of the voice service. The multimedia
and local content-rich applications can also
be easily implemented on this NGN architecture.
IP DSLAM can be easily configured by VigorCMS.
The VigorCMS system covers topology, configuration,
deployment, security, alarm management and
backup storage.
Service
Category
- High Speed Internet Access
(HSIA)
IP DSLAM aggregates DSL subscribers
and terminates the encapsulated type
ATM cell. User can easily access extreme
high speed Internet through the IP backbone
network.
- Gaming Application Service
By combining gaming server, IP DSLAM
can provide gaming service.
- Stream TV Service
IP DSLAM uses ADSL2+ high speed DSL
technology, and supports stream TV service.
- Video on Demand Service
Service provider can offer multimedia
services by setting up video or content
server on the local side. By combining
rich content video server, IP DSLAM
also provides the Video on Demand service.
User can enjoy multimedia content based
on IP DSLAM architecture.
- VoIP Service
IP DSLAM can combine IAD, DSL/VoIP gateway
to provide toll quality voice communication
in terms of voice quality and reliability.
- Mail or Portal Service
IP DSLAM provides the feasibility to
connect mail or proxy server by combining
IP DSLAM.
- Enterprise Solution
System integrator provides enterprise
with VoIP, Video on Demand, ADSL2+ and
VDSL bundle IP DSLAM solution. The firewall
and VPN security of IP DSLAM is also
provided by the architecture to meet
business requirement. This application
is suitable on Hotel and MTU application.
The system provides Annex M 3Mbps rate
as high speed uplink rate requirement
for the enterprise customer.
- Rich Content Application
IP DSLAM is able to integrate with content
server to offer corporation, mall, building
,or campus a complete network with rich
services. These services include video
on demand, remote monitor, building
security and product browsing. |
Main Feature
- 24 to 168 ports ADSL2/2+, Annex
A / L / M
- Packet filter, and password protection
- Splitter built-in
- Selectable one or two Gigabit optical
interface for Master device
- 6 ports cascaded Gigabit copper
interface for Slave device
- Common central office and outside
plant deployments
- Single IP management
- Packet filter and classification
- IGMP snooping V1, V2 for IPTV application
- DELT and SELT line test support
- Long reach DSL for expended range
- Annex M for 3M upstream and 20M
downstream
- 4 QoS queues for IP Video, VoIP
and date stream handling
- IEEE802.1Q VLAN, 802.1p for multimedia
stream
|
Benefits
- New DSL technology - ADSL2/2+, Annex
A / L / M
- Inventory saving for common on CO
and RT
- Scalable architecture for 24 to
168 ports
- Reliability for Telecom approval
product
- Strict QoS for critical multimedia
stream
- Telecom approval VigorCMS
|
|
|
|
Technical
Specifications of VigorAccess |
| Hardware
Interface |
Uplink Interface |
Master |
1x or 2x IEEE802.3z 1000 BASE-LX/SX
with LC or SC connector |
| Slave |
1x RJ-45 IEEE802.3ab 1000 BASE-T, or 2xRJ-45
IEEE802.3u 100 BASE-TX |
| Cascade |
Master |
6x RJ-45 IEEE802.3ab 1000 BASE-T |
| DSL |
24-port 50-pin RJ-21 Champ
connector |
| POTS |
24-port 50-pin RJ-21 Champ
connector |
| Console Port |
1x RJ-45 |
| Alarm Port |
1 output alarm contact |
| DSL |
Backward compatible to ITU-T
G.992.1, G.dmt, ITU-T G.992.2 G.lite, ANSI T1.413
issue 2, ITU-T G.992.3 ADSL2, ITU-T G.992.5 ADSL2+ |
| Upstream 3M Annex M and Long
reach DSL for Annex L of G.992.3 |
| Power management defined on
G.992.3 and G.992.5 |
| SELT ( Single Ended Line Testing
) for ADSL |
| DELT ( Dual End Loop Testing
) for ADSL2 |
| Fast Seamless Rate Adaptation
( Fast SRA ) |
| Dying gasp |
| Indicator |
Master |
Power, Active, Critical/Major/Minor
Alarm, DSL for link Activity, Subtend |
| Slave |
Power, Active, Critical/Major/Minor
Alarm, DSL for link Activity |
| Encapsulation
Mode |
RFC 2684 MPoA LLC/VCMUX |
| PPPoA to PPPoE conversion |
| ATM Feature |
8 PVCs per subscriber line |
| F5 end-to-end and segment-to-segment
OAM loopback in I.610 |
| UNI 3.1 / 4.0 PVC |
| VPI ( 0 - 255 ), VCI ( 0 - 65535
) |
| Provide Incoming and Outgoing
rate limit per PVC |
| Bridge Feature |
IEEE802.1p CoS Prioritization |
| IEEE802.1Q VLAN support |
| IGMP Snooping and 256 multicast
groups |
| 802.1d STP |
| GARP / GVRP |
| MAC, Packet Filter and Classifier |
| 4,000 MAC addresses |
| Support ICMP request from VigorCMS
or management tool |
| DHCP Option 82 |
| Port Isolation |
| VPN pass-through |
| PPPoE packet forwarding |
| VLAN |
Support 4094, concurrent 512
VLAN ID |
| IEEE802.1Q tag-based VLAN |
| VLAN ID mapping to PVC |
| GVRP |
| QoS |
IEEE802.1p |
| 4 priority queues for multimedia
application |
| Configurable priority mapping
for PVC and IEEE802.1p |
| Strict priority |
| Probabilistic priority |
| Customized priority |
| Multicast Feature |
IGMP snooping V1, V2 defined
on RFC2236 |
| 256 multicast groups |
| Management |
In-band or Out-of-band by single
IP management |
| SNMP v1.0 & v2c |
| SNMP MIB for RFC1213, Ethernet
, RFC2662, RFC3440 and proprietary MIBs |
| Standard SNMP trap report to
VigorCMS or NMS |
| TFTP firmware upgrade utility
via VigorCMS |
| Telnet server for remote management |
| SNMP enabled for network management
function |
| Console or Telnet CLI for configuration
or status monitor |
| Regulatory |
EN550221 Class A & EN300386
V1.3.2, CE |
| Environment |
Operating temperature : -10
°C to 65 °C |
| Storage temperature : -10
°C to 85 °C |
| Operating Humidity : 10 °C
to 95 °C ( non-condensing ) |
| Storage Humidity : 5% to 95%
( non-condensing ) |
| Safety |
EN60950-1 |
| MTBF |
55,000 hours |
| Temperature |
Operating : 0°C ~ 55°C |
| Storage : -10°C ~ 85°C |
| Humidity |
10% ~ 90% |
| Power Consumption |
60 Watt, 75max |
| Dimension |
L440 * W280 * H45 (mm) |
| Power |
AC 90 ~ 260 VAC, DC -42V ~ -60V |
|
|
|
Page last modified : 09 September 2008 |